How to use this guide:
Side Space: The amount of room necessary to accommodate the width of the slide assembly. The side space dimension is critical for optimal smooth movement.
Extension:
  • 75% extension: Opens approximately 75% of the total length.
  • 100% extension: Opens the same amount as the slide length.
  • 100%+ extension: Overtravel is achieved. Opens in excess of the slide length.
Travel: Distance in mm between fully closed and fully open slide.
Disconnect: Allows simple disconnection from slide assembly. A lever or latch must be actuated before the drawer can be removed.
Detent: Holds the slide in the open or closed position until extra force is applied to overcome the detent.
Progressive
Moment:		 Synchronized.


Accuride-Slides are available in the following standard finishes and packaging:
  Packaging Finish
DZ Quick Ship (ex. stock) Electro zinc plate and clear chromate
CZ Manufactured to order Electro zinc plate and clear chromate
DB Quick Ship (ex. stock) Electro zinc plate and clear chromate
CB Manufactured to order Electro zinc plate and clear chromate
DS Quick Ship (ex. stock) Stainless steel
SS Manufactured to order Stainless steel
CY Manufactured to order Electro zinc plate and yellow chromate
MY Manufactured to order Electro zinc plate and yellow chromate
For other packaging please contact: merath, metallsysteme GmbH.


Materialspecifications
Slide members: cold rolled steel
Ball retainers: cold rolled steel-zinc-plate
Ball bearings: precison type, carbon steel
Lubricant: High-Low temparature grease
Stainless steel: 1.4301: X5CrNi 1810
General Technical Information:

  • Tolerrances unless otherwise stated are +-0.8 linear or +- 0.2 on diameter
  • Internal clearances permit screw head dimensions not exceeding 2,5 mm high x 9,6 mm diameter ( on the 9301 outer members and the 0531 only the M5 countersunkscrew maybe used).
  • Holes other than shown may in the members at Accuride options.

Your Accuride ordering code is made up as follows:
For Example:
SS0501-0020LJ:

Would be slide modell 0501 manufactured to order in Stainless steel, with a look open and close.
DZ0301-0016:

Would be slide modell 0301 in bright zinc finished, supplied from the Quick-ship Programme.